Anonymous

How To Fix A Silly Band?

79

79 Answers

Anonymous Profile
Anonymous answered
Put glue on it. Then freeze it in your freezer for 5 minutes. It does work!!
Anonymous Profile
Anonymous answered
Try putting a dot of super glue right where it is broken and then spray it with hairspray that has extra hold and then put it in the freezer for a few days (p.s. It really works iv done it)
Anonymous Profile
Anonymous answered
I'm going to try to freeze it then put it in the microwave. Sew it but I left my sewing kit at my other house. Put nail polish on it. Super glue it then put hairspray on it then freeze it. Freeze it for 6 days. Do the magnifying glass thing. And a long one where you put glue on it then put hot water on it then put tape on it. Wish me luck! And ps I can use an iron and a lighter so I couldn't do that.
Anonymous Profile
Anonymous answered
Don't use an iron, my silly band didn't melt. But the ironing board got burned.
Anonymous Profile
Anonymous answered
Don't use a hot glue gun, it wont stay together... :P (ive tried it a billion times O__o)
Anonymous Profile
Anonymous answered
DO NOT use a liter it wont work and it makes them white and burnt and DO NOT  microwave it it will just get on fire and  the iron doesnt work. Now if you will excuse me I have a Eagle ,unicorn ,star ,football and a seal to sew back together
Anonymous Profile
Anonymous answered
Crazy glue it. And wait alittle and below on it. Then see if it stuck together. Then after that put it in the freeze it for 5 min. Then brand new!! Good luck
Anonymous Profile
Anonymous answered
I used top coat nail polish and it work perfectly! And its been like three months since ive fixed it and ive been wearing it twentyfour seven and I havent had to fix it! Its great!
Anonymous Profile
Anonymous answered
You can just glue it togethor with elmers glue or some kind of glue then put tape around the glue leave it alone for a couple of days then its good as new!!(hope it works)
Anonymous Profile
Anonymous answered
What you need: Invisible string, a needle, a broken silly band.
Take the needle and poke 2 holes, onein each side of the sillyband, then stick in your invisble string, and tie it together. Make sure the holes are close to the end of the rip or else it might change the shape of your silllyband. Ive done it with all of my sillybandz and it really does work. You can even change the shapes of other ones doing it. Its quite interesting, really! :P
hazard: Poking too big of a hole, the sillyband will just rip there within a day.
-Riana
btw you can catch me on a lot of websites, if you look hard.
Especially catch me on www.habbok.com my name is riabear11
and some other websites, www.riabear11.deviantart.com
anyways I got to go eats nowww :P
byeeee
Anonymous Profile
Anonymous answered
You connect the to broken peices and then you iron it and it will melt and then it will be as you brought it
Anonymous Profile
Anonymous answered
Don't put it in the microwave. It don't work ive tried it. But my sister glue it the put a little ting of paper around the glue then froze it and it been that way for several months now. Good Luck. :))
Anonymous Profile
Anonymous answered
Super glue it . It works but then don't use that one that often, it's bound to break. Mine did and I have repaired it like 4 times.
Anonymous Profile
Anonymous answered
Put glue and then nail glue on the silly band then put in the freezer for 5 minutes
Anonymous Profile
Anonymous answered
I did the microwave thing for 30 seconds - it doesnt work - I even put it in there for 2 minutes and it still didnt fuse back together...it just got really hot ^-^
Anonymous Profile
Anonymous answered
Don't use a lighter. I tried it, and it caught on fire. It's going to be really hard to fix now:)
Anonymous Profile
Anonymous answered
Put the silly band(z) in the freezer. Leave it there for 6 days. Check on it when the time is up.
It does not work any other way I tried them all.
Anonymous Profile
Anonymous answered
Put it in the oven for 5 min. Make sure the broken part is over lap ing put oven on low
Anonymous Profile
Anonymous answered
Use a hot glue gun and glue it in the exact spot. Let it dry for as long as needed and then it is good as new. :)
Anonymous Profile
Anonymous answered
You can put it in boiling water then hot glue it then put it back into the hot water (it works)
Anonymous Profile
Anonymous answered
I heard that you can fuse the broken ends together with a lighter I haven't tried it myself, I will tho (: Hope tht helps! (I have like, 6 broken ones)
Anonymous Profile
Anonymous answered
Well you can Sew, Knot, and use the Crazy Glue and put it in the freezer for five to ten minutes! It worked wonders for me! ;) Hope this helped!!!
Anonymous Profile
Anonymous answered
Ironing doesn't work... If you have real silly bands they are silicon and silicon melts at like 500 degrees so it won't work.
Anonymous Profile
Anonymous answered
SEW IT!!! Thats what I did with my Stingray!! Sew the two broken ends together with a needle and thread! It works great! :D
phoebs lee Profile
phoebs lee answered
Use a hot glue gun. But why waste time with one silly band when you can just go to the dollar store and buy a pack.
Anonymous Profile
Anonymous answered
I'm trying to freeze it but idkk I have a broken dolphin and I love dolphins and I'm angry
Anonymous Profile
Anonymous answered
I have no idea I'm trying the freezer idea! I'm puting it for 5 minutes! Wish my luck! :D
Anonymous Profile
Anonymous answered
Don't use a lighter it will just burn the sillyband. Use gorilla glue then freeze for a little while.:)
Anonymous Profile
Anonymous answered
I have tried everything  to ironing, freezing, stapling, well... Mostly I tried everything imgonna try a magnfine glass
Anonymous Profile
Anonymous answered
Well people say you can boil it with a little bit of salt and it will come bak togther I don't no I'm trying it right now while I'm typing
Anonymous Profile
Anonymous answered
I'm guessing either iron it, glue and freeze it, or just buy a new one. But I have a relly rare sillyband and I don't want to risk it. Its the pegases. I'm going to use a test and ill report back. C you and wish me luck! ;)
Anonymous Profile
Anonymous answered
Iron it but my too long or it will turn flat trust me I tried it and it worked! Well for one of them I only tried two but the other I guess it was because it was real silicone so it didn't melt as fast as the fake bear
thanked the writer.
Kim Marie
Kim Marie commented
I answered this and Yay i made an account so now i can post more of my experiences.Oh and also i tried it with a couple more and they work for most of the time but rea silly bandz dont work
Anonymous Profile
Anonymous answered
Well, I had a purple, sparkly genie and it broke on me. I took a paintbrush, a sewing needle, Elmer's Glue, paper towels, tape, and hot water. I cut the bristles off of the paintbrush, then dabbed the brush in glue. You place the broken Silly Band on the paper towel and you gently rub the paintbrush w/ glue over the broken part. Then, sterilize the needle with the hot water and smooth over the glue. Finally, apply tape to glued part. If it doesn't work, iron it for 30 seconds. Now if you excuse me, I have a yellow, sparkly phoenix to fix.
Anonymous Profile
Anonymous answered
Super glue worked for me but it has to be on a strait part it can't glue on a bend it will snap. If you have tried fire and all it did was light on fire and turn gray use a knife and cut the tips and then super glue (ps you might need to hold it to gether then use water and a wet rag to get the glue off. It worked for me hope this helps)
Anonymous Profile
Anonymous answered
I used rubber cement put it on a plate then put super glue on it and  put it in the freezer for a half an hour if you take it out to soon it will break agian then after a half an hour rub the broken part with an ice cube
Anonymous Profile
Anonymous answered
Hot glue worked for me for like a week but then it broke again, I found thread that was the same color as the silly band & sewed it back together it really worked
Anonymous Profile
Anonymous answered
Ok so what I'm trying is I'm burning a candle and the wax tht melt underneath I'm using to use as a glue to hold the broken ends together. It drys fast I just hope it stays. Good luck
Anonymous Profile
Anonymous answered
Heat up a pot or pan on the stove to a really high temperature. Then put both broken ends in the heated pot/pan until their soft. Then fuse the ends together and put it in the freezer for a while
Anonymous Profile
Anonymous answered
I tried gluing it putting it in the freezer for 5 min. And then it didn't work so I ironed it and it didn't work so now I am gluing it and putting it back int her freezer and it is starting to work!!!
Anonymous Profile
Anonymous answered
Just get yourself a new one or if someone has the one you like juz ask them if you can have it for another silly band and there it goes you got a silly band you like
Anonymous Profile
Anonymous answered
Ok if it's broken then just go buy some more :) or if you don't want to buy some more silly banz then flat  iron it  for 15 seconds okgood luck and be careful .
(it dose work)
Anonymous Profile
Anonymous answered
All you got to do is put some nail glue were you want it to joing and put it in  the freezer fior 5 min then brand new :0
Anonymous Profile
Anonymous answered
Plp say that if you put it in the freezer for 5-6 hours and then put it in for 3-5 secs in tha microwave it will stick back together putt the problem is I don't HAVE 5-6 hours I need it now!
Anonymous Profile
Anonymous answered
What is wrong with you. Why would you use a liter oh my god oh my god oh my god oh my god how in the world do you use a liter to fix a silly band it is enpossible

Answer Question

Anonymous